Die Casting’s Blog

Many believe that iron casting is just simply out of reach for small furnaces but this is not the case. While alloys like aluminum are more prevalent in home foundries. Artists and hobbyists have also used brass, bronze, and even iron to fulfill their casting needs.

Industrial foundries commonly use iron for a variety of items like cookware, like cast iron pans, and even bridges. Casting iron provides an easy and effective method of making such large structural pieces and even smaller pieces for around the home.

The most common furnace type used by home foundries is the cupola furnace. The cupola is a basic furnace type that does not need a crucible as it allows the caster to pour the molten metal directly from the furnace into a ladle which is then poured into the mold. Cupola furnaces resemble smoke stacks and can be home made for those with enough confidence and some mechanical know-how to attempt it. The fuels used to heat the metal in a cupola furnace depend on the caster’s resources and preference. Many will use propane and some will use coal. There are a select few that will use waste material such as old scraps of metal and the powder at the bottom of bags of barbecue coal to fuel the cupola. For iron many would recommend the use of propane, but there have been some casters that have succeeded with waste material. Don’t be afraid to experiment with different fuel types to find the perfect fit for your furnace and need. mould design

Finding a source of iron can be difficult and a trip to the scrap yard might be in order. This is just one of the exciting ventures that metal casting can provide you. After you locate your iron you will need to prepare your mold. This is assuming you have a pattern in mind that you want to cast. If not, then go ahead and figure something out even if it’s a small piece in order to test your iron casting ability. Since sand casting is the most popular casting method you might want to use it for the iron casting especially if you are familiar with the method and not with iron. Steel Casting