Die Casting’s Blog

Name: Heat Sink & Air Compressor Components

Technology: Heat Sink & Air Compressor Components produced by investment casting, sand casting, die casting permanent mold casting etc process
Material: Heat Sink & Air Compressor Components produced by produced by carbon steel,alloy steel,cast iron,ductile iron,aluminum alloy,zinc alloy,copper alloy etc materials
Finish: Heat Sink & Air Compressor Components finished by powder coat,paint ,plated,polish,shot blasting,sand blasting etc

According to the Environmental Protection Agency, geothermal systems are the most energy efficient, cost-effective and environmentally clean heating/cooling systems available. A 1,500 square foot home in Colorado that uses a geothermal heat pump, averages energy costs of $1 a day. This includes all heating, cooling and hot water needs!

Geothermal heat pump systems can reduce a building’s energy consumption by 25% to 75%, as compared with conventional heating systems. Not only do they reduce energy consumption, but GHPs significantly lesson corresponding emissions. Emissions can be reduced up 44-72%, as compared with standard air-source heat pumps and air conditioning equipment. If you want to upgrade your space conditioning sources or are building a new home, these systems are green, clean and lean. In the long run they will benefit your pocket-book and the environment.

The simplest description of the geoexchange process is the movement of heat from the earth (or a groundwater source) into the home in the winter, and the discharging of heat back into the ground in the summer. Much of the country experiences extreme seasonal temperatures. But, did you know that just a few feet below the earth’s surface, the ground remains a relatively constant temperature? Ground temperatures range from 45 to 75 degrees Fahrenheit. As in a cave, the ground temperature is warmer than the ambient air in the winter and cooler than that air in the summer. Geoexchange systems take advantage of this natural phenomenon.